August Home Assistant Integration: Entity Not Found... | digitalhomefaults.org

Technical Background:

The August Home Assistant integration relies on either a direct Z-Wave/Zigbee connection or a cloud-based API link. The August lock transmits its status (locked/unlocked, battery level) via its radio to the Home Assistant hub. Interruption of this communication flow results in an entity not found error. Authentication requires valid API keys and proper configuration within Home Assistant.

Symptoms:

Persistent 'Entity Not Found' error displayed within the Home Assistant interface for the August lock. Lock functionality unavailable through Home Assistant. No error codes shown on the physical lock (LED patterns normal).

Possible Causes:

Z-Wave or Zigbee network instability due to RF interference (900MHz or 2.4GHz) from nearby devices.
Incorrectly configured or expired August API credentials within Home Assistant.
Home Assistant August integration is outdated or corrupted.
August lock firmware incompatibility with the current Home Assistant version.
Temporary outage of the August cloud service.
Network connectivity problems between the Home Assistant hub and the local network/internet.

Solution:

1

Verify network connectivity of the Home Assistant hub. Ensure it has a stable internet connection. Ping the hub from another device on the network to confirm.
2

Check the August lock's battery level. Replace if below 20%. Low battery can cause intermittent connectivity issues, especially in cold Canadian winters.
3

Update the August Home Assistant integration to the latest version via the Home Assistant add-on store. Restart Home Assistant after the update.
4

Re-authenticate the August integration in Home Assistant. Revoke the existing API keys and generate new ones through the August developer portal, then re-enter them in Home Assistant. Refer to August documentation for key generation process.
5

If using Z-Wave or Zigbee, rescan your Z-Wave/Zigbee network for the August lock. Exclude and re-include the device to ensure correct pairing. Consider using a Z-Wave/Zigbee range extender if the lock is far from the hub.
6

Consult the Home Assistant logs for detailed error messages related to the August integration. These logs may provide clues about the cause of the error.
7

Check if your ISP (Bell Giga Hub, Rogers Ignite) is blocking any ports or traffic required for the August integration. Contact your ISP if needed.

Safety Warning:

When working with electrical components, always disconnect the power supply. Ensure proper grounding. Data privacy is paramount. Securely store August API keys and restrict access to your Home Assistant instance. Be aware of physical tampering risks with the lock itself. Regularly audit access logs.

Prevention:

Schedule regular battery health checks for the August lock, particularly before the onset of winter. Keep the Home Assistant integration and the August lock firmware up to date via Over-The-Air (OTA) updates. Assign a static IP address to the Home Assistant hub on your local network to prevent IP address conflicts. Periodically check and renew August API keys to prevent expiration.

Expert Tip:

If the 'Entity Not Found' error persists, try disabling and then re-enabling the August integration within Home Assistant. This can sometimes force a refresh of the entity list. Also ensure the August Connect Wi-Fi bridge (if applicable) is online and properly connected to your Wi-Fi network. Check for known service outages on the August website.

Frequently Asked Questions

•How do I generate API keys for the August Home Assistant integration?

Refer to the August developer documentation for instructions on creating and managing API keys. Typically involves creating a developer account and registering your Home Assistant instance.

•What are common sources of Z-Wave/Zigbee interference in a Canadian home?

Microwave ovens, cordless phones (900MHz), Wi-Fi routers (2.4GHz), and metal objects can all interfere with Z-Wave/Zigbee signals. Distance from the hub is also a factor, especially through concrete walls common in Canadian construction.

•How often should I replace the batteries in my August smart lock, given Canadian winters?

It's recommended to replace batteries annually, preferably in the fall before temperatures drop significantly. Cold temperatures can drastically reduce battery life. Use lithium batteries for best performance in extreme cold.

August Home Assistant Integration: Entity Not Found Troubleshooting

Technical Background:

Symptoms:

Possible Causes:

Solution:

Safety Warning:

Prevention:

Expert Tip:

Frequently Asked Questions

Frequently Asked Questions

•How do I generate API keys for the August Home Assistant integration?

•What are common sources of Z-Wave/Zigbee interference in a Canadian home?

•How often should I replace the batteries in my August smart lock, given Canadian winters?

Related Questions

Technical Background:

Symptoms:

Possible Causes:

Solution:

Safety Warning:

Prevention:

Expert Tip: